Skip to main content

Development Environment Setup

Quick Start​

Clone NE301 Repository​

git clone https://github.com/camthink-ai/ne301.git
cd ne301

Development Environment Setup​

Prerequisites: Docker 20.10+ Disk Space > 10GB+

# 1. Build (Or pull)Docker image
docker build -t ne301-dev:latest .

# or pull (faster)
docker pull camthink/ne301-dev:latest

# 2. Run container
docker run -it --rm --privileged \
  -v $(pwd):/workspace \
  -v /dev/bus/usb:/dev/bus/usb \
  camthink/ne301-dev:latest
  
# 3. Inside container
make                        # Build all

Method 2: Manual Installation​

Prerequisites:

  • ARM GCC 13.3+
  • GNU Make 3.81+
  • Python 3.8+
  • Node.js 20+
  • pnpm 9+
  • STM32CubeProgrammer(v2.19.0)
  • STM32_SigningTool_CLI(v2.19.0)
  • stedgeai(v2.2,stedgeai0202.stneuralart)
# 1. Check environment
./check_env.sh

# 2. Install as prompted
./setup.sh                  # Linux/macOS
setup.bat                   # Windows

# 3. Verify
./check_env.sh
# success output：
  =========================================
  NE301 Required Tools Check
  =========================================

  Essential Tools:
  ----------------
  [OK] ARM GCC Compiler
  arm-none-eabi-gcc.exe (GNU Tools for STM32 13.3.rel1.20240926-1715) 13.3.1 20240614
  [OK] ARM Objcopy
  GNU objcopy (GNU Tools for STM32 13.3.rel1.20240926-1715) 2.42.0.20240614
  [OK] GNU Make
  GNU Make 4.2.1

  Build Tools:
  ------------
  [OK] Python 3
  Python 3.11.3
  [OK] Node.js
  v22.17.0
  [OK] pnpm
  10.16.1

  STM32 Tools:
  ------------
  [OK] STM32 Programmer
  -------------
  [OK] STM32 Signing Tool
        -------------------------------------------------------------------

  AI Model Tools:
  ---------------
  [OK] ST Edge AI
  ST Edge AI Core v2.2.0-20266 2adc00962
  [OK] STEDGEAI_CORE_DIR = H:\stm32\STEdgeAI\2.2

  =========================================
  Result: Essential tools complete! βœ“

  You can now run:
    make              # Build firmware
    make web          # Build web
    make model        # Build AI model
    make flash        # Flash to device
  =========================================

If every tool reports [OK], you're ready to build for NE301 πŸŽ‰